Xuan Song
Cited by
Cited by
Recent progress in biomimetic additive manufacturing technology: from materials to functional structures
Y Yang, X Song, X Li, Z Chen, C Zhou, Q Zhou, Y Chen
Advanced Materials 30 (36), 1706539, 2018
Biomimetic anisotropic reinforcement architectures by electrically assisted nanocomposite 3D printing
Y Yang, Z Chen, X Song, Z Zhang, J Zhang, KK Shung, Q Zhou, Y Chen
Advanced materials (Deerfield Beach, Fla.) 29 (11), 2017
3D printing of piezoelectric element for energy focusing and ultrasonic sensing
Z Chen, X Song, L Lei, X Chen, C Fei, CT Chiu, X Qian, T Ma, Y Yang, ...
Nano Energy 27, 78-86, 2016
Effect of the particle size and the debinding process on the density of alumina ceramics fabricated by 3D printing based on stereolithography
H Wu, Y Cheng, W Liu, R He, M Zhou, S Wu, X Song, Y Chen
Ceramics International 42 (15), 17290-17294, 2016
Fabrication of dense zirconia-toughened alumina ceramics through a stereolithography-based additive manufacturing
H Wu, W Liu, R He, Z Wu, Q Jiang, X Song, Y Chen, L Cheng, S Wu
Ceramics International 43 (1), 968-972, 2017
Preparation of a defect-free alumina cutting tool via additive manufacturing based on stereolithography–Optimization of the drying and debinding processes
M Zhou, W Liu, H Wu, X Song, Y Chen, L Cheng, F He, S Chen, S Wu
Ceramics international 42 (10), 11598-11602, 2016
Ceramic fabrication using Mask-Image-Projection-based Stereolithography integrated with tape-casting
X Song, Y Chen, TW Lee, S Wu, L Cheng
Journal of Manufacturing Processes 20, 456-464, 2015
Development of a low-cost parallel kinematic machine for multidirectional additive manufacturing
X Song, Y Pan, Y Chen
Journal of Manufacturing Science and Engineering 137 (2), 021005, 2015
Three dimensional printing of high dielectric capacitor using projection based stereolithography method
Y Yang, Z Chen, X Song, B Zhu, T Hsiai, PI Wu, R Xiong, J Shi, Y Chen, ...
Nano Energy 22, 414-421, 2016
Comparison of the accuracy of implant position using surgical guides fabricated by additive and subtractive techniques
P Henprasert, DV Dawson, T El‐Kerdani, X Song, E Couso‐Queiruga, ...
Journal of Prosthodontics, 2020
Piezoelectric component fabrication using projection-based stereolithography of barium titanate ceramic suspensions
X Song, Z Chen, L Lei, K Shung, Q Zhou, Y Chen
Rapid Prototyping Journal 23 (1), 44-53, 2017
Support-Free Ceramic Stereolithography of Complex Overhanging Structures Based on an Elasto-viscoplastic Suspension Feedstock
L He, F Fei, W Wang, X Song
ACS applied materials & interfaces 11 (20), 18849-18857, 2019
Supportability of a High-Yield-Stress Slurry in a New Stereolithography-Based Ceramic Fabrication Process
L He, X Song
JOM, 1-6, 2017
Porous structure fabrication using a stereolithography-based sugar foaming method
X Song, Z Zhang, Z Chen, Y Chen
Journal of Manufacturing Science and Engineering 139 (3), 031015, 2017
Fabrication of fine-grained alumina ceramics by a novel process integrating stereolithography and liquid precursor infiltration processing
W Liu, H Wu, M Zhou, R He, Q Jiang, Z Wu, Y Cheng, X Song, Y Chen, ...
Ceramics International 42 (15), 17736-17741, 2016
Regional Gene Therapy with 3D Printed Scaffolds to Heal Critical Sized Bone Defects in a Rat Model
R Alluri, X Song, S Bougioukli, W Pannell, V Vakhshori, O Sugiyama, ...
Journal of Biomedical Materials Research Part A, 2019
Three-Dimensional Printed Piezoelectric Array for Improving Acoustic Field and Spatial Resolution in Medical Ultrasonic Imaging
Z Chen, X Qian, X Song, Q Jiang, R Huang, Y Yang, R Li, K Shung, ...
Micromachines 10 (3), 170, 2019
Effect of Meso‐Scale Geometry on Piezoelectric Performances of Additively Manufactured Flexible Polymer‐Pb(ZrxTi1−x)O3 Composites
YZ Ji, Z Wang, B Wang, Y Chen, T Zhang, LQ Chen, X Song, L Chen
Advanced Engineering Materials 19 (6), 1600803, 2017
Additive Manufacturing of Bi-continuous Piezocomposites with Triply Periodic Phase Interfaces for Combined Flexibility and Piezoelectricity
X Song, L He, W Yang, Z Wang, Z Chen, J Guo, H Wang, L Chen
Journal of Manufacturing Science and Engineering, 1-17, 2019
Joint design for 3-D printing non-assembly mechanisms
X Song, Y Chen
International Design Engineering Technical Conferences and Computers and …, 2012
The system can't perform the operation now. Try again later.
Articles 1–20