Follow
HamidReza Vanaei
HamidReza Vanaei
Associate Professor @ ESILV - Ecole Supérieure d'Ingénieurs Léonard de Vinci
Verified email at devinci.fr
Title
Cited by
Cited by
Year
A review on pipeline corrosion, in-line inspection (ILI), and corrosion growth rate models
HR Vanaei, A Eslami, A Egbewande
International Journal of Pressure Vessels and Piping 149, 43-54, 2017
3432017
An overview on materials and techniques in 3D bioprinting toward biomedical application
S Vanaei, MS Parizi, S Vanaei, F Salemizadehparizi, HR Vanaei
Engineered Regeneration 2, 1-18, 2021
2452021
Influence of process parameters on thermal and mechanical properties of polylactic acid fabricated by fused filament fabrication
HR Vanaei, M Shirinbayan, M Deligant, K Raissi, J Fitoussi, S Khelladi, ...
Polymer Engineering & Science 60 (8), 1822-1831, 2020
722020
Toward the understanding of temperature effect on bonding strength, dimensions and geometry of 3D-printed parts
HR Vanaei, K Raissi, M Deligant, M Shirinbayan, J Fitoussi, S Khelladi, ...
Journal of Materials Science 55, 14677-14689, 2020
702020
Experimental study of PLA thermal behavior during fused filament fabrication
HR Vanaei, M Shirinbayan, SF Costa, FM Duarte, JA Covas, M Deligant, ...
Journal of Applied Polymer Science 138 (4), 49747, 2021
532021
3D Bioprinting of Polycaprolactone-Based Scaffolds for Pulp-Dentin Regeneration: Investigation of Physicochemical and Biological Behavior
Z Mousavi Nejad, A Zamanian, M Saeidifar, HR Vanaei, M Salar Amoli
Polymers 13 (24), 4442, 2021
512021
Multi-scale damage analysis and fatigue behavior of PLA manufactured by fused deposition modeling (FDM)
HR Vanaei, M Shirinbayan, S Vanaei, J Fitoussi, S Khelladi, A Tcharkhtchi
Rapid Prototyping Journal 27 (2), 371-378, 2021
452021
3D printed and conventional membranes—a review
BG Thiam, A El Magri, HR Vanaei, S Vaudreuil
Polymers 14 (5), 1023, 2022
432022
In-process monitoring of temperature evolution during fused filament fabrication: A journey from numerical to experimental approaches
HR Vanaei, M Shirinbayan, M Deligant, S Khelladi, A Tcharkhtchi
Thermo 1 (3), 332-360, 2021
412021
Numerical prediction for temperature profile of parts manufactured using fused filament fabrication
HR Vanaei, S Khelladi, M Deligant, M Shirinbayan, A Tcharkhtchi
Journal of Manufacturing Processes 76, 548-558, 2022
382022
A comparative in‐process monitoring of temperature profile in fused filament fabrication
HR Vanaei, M Deligant, M Shirinbayan, K Raissi, J Fitoussi, S Khelladi, ...
Polymer Engineering & Science 61 (1), 68-76, 2021
362021
Effects of Laser Power and Hatch Orientation on Final Properties of PA12 Parts Produced by Selective Laser Sintering
A El Magri, SE Bencaid, HR Vanaei, S Vaudreuil
Polymers 14 (17), 3674, 2022
272022
Investigating the effect of printing conditions and annealing on the porosity and tensile behavior of 3D‐printed polyetherimide material in Z‐direction
SE Ouassil, A El Magri, HR Vanaei, S Vaudreuil
Journal of Applied Polymer Science, e53353, 2022
272022
Numerical–experimental analysis toward the strain rate sensitivity of 3D-printed nylon reinforced by short carbon fiber
HR Vanaei, AE Magri, MA Rastak, S Vanaei, S Vaudreuil, A Tcharkhtchi
Materials 15 (24), 8722, 2022
182022
Roadmap: numerical-experimental investigation and optimization of 3D-printed parts using response surface methodology
HR Vanaei, S Khelladi, A Tcharkhtchi
Materials 15 (20), 7193, 2022
142022
Effects of power and laser speed on the mechanical properties of AlSi7Mg0. 6 manufactured by laser powder bed fusion
S Vaudreuil, SE Bencaid, HR Vanaei, A El Magri
Materials 15 (23), 8640, 2022
112022
Towards an accurate aerodynamic performance analysis methodology of cross-flow fans
RM Himeur, S Khelladi, MA Ait Chikh, HR Vanaei, I Belaidi, F Bakir
Energies 15 (14), 5134, 2022
82022
Synthesis Characterization and Highly Protective Efficiency of Tetraglycidyloxy Pentanal Epoxy Prepolymer as a Potential Corrosion Inhibitor for Mild Steel in 1 M HCl Medium
R Hsissou, R Lachhab, A El Magri, S Echihi, HR Vanaei, M Galai, ...
Polymers 14 (15), 3100, 2022
62022
Etude et Modélisation de la rhéologie des polymères au cours du procédé FDM (Fabrication additive)
HR Vanaei
Paris, HESAM, 2021
32021
3D Printed and Conventional Membranes—A Review. Polymers 2022, 14, 1023
BG Thiam, A El Magri, HR Vanaei, S Vaudreuil
Polymers and Their Application in 3D Printing, 159, 2022
12022
The system can't perform the operation now. Try again later.
Articles 1–20